8 Best Sewage Ejector Pump in 2024 | LydiaScapes

Best Sewage Ejector Pump

When considering ejector pumps for sewage, you know you need something long-lasting, reliable, and durable that can handle rough conditions. But, you have to admit, it’s not a glamorous job, so the right tools are essential. You may even want to consider something with cast-iron housing if you want something that will last and that is easy to install, even for beginners. Here are some of the best ejector pumps for sewage on the market that we found.

What is the Best Sewage Ejector Pump?

Below you’ll find the list of the top 8 Best Sewage Ejector Pump. We compiled this list from sewage ejector pumps we have used, asked others about, and researched further to give you the best possible roundup. With many years of experience with ejector pumps for sewage you can be assured that this article will give you what you’re looking for.

We also wrote a buying guide and answered some of the frequently asked questions (FAQs) at the end of this article.

1. Superior Pump 93501 1/2-Horsepower Cast Iron Sewage Pump with Tethered Float Switch

Superior Pump 93501 1/2-Horsepower Cast Iron Sewage Pump with Tethered Float Switch
Specs
Price: 💲💲 (fewer 💲 = cheaper)
Weight: 25.2 pounds (11.43 kg)
Size: 9.8 x 16.8 x 9 inches (24.8 x 42.5 x 22.9 cm)
Flow Rate: 80 gallons per minute
Power Source: AC
Horsepower: 1/2 HP
Main Material: Cast iron
Voltage: 120
Wattage: 912

The superior pump is relatively lightweight, giving you an easy time installing. It runs quietly. The pump is reliable and may last for several years before requiring a replacement. You have the choice of operating it manually or automatically due to the piggyback power plug. It has been installed with a non-clogging high-performance vortex impeller, making it easy to use in harsh environments.

The pump can lift water up to 25 feet while delivering 80 gallons per minute. It can handle 2-inch solids with high capacity pumping. With its high capacity, it can run both residential and commercial applications.

It has no airlock hole and may require you to create one for the pump to work without having airlock issues..

Pros

  • Easy to connect,
  • Made from durable materials,
  • Does high capacity pumping,
  • It doesn’t make noise when in operation

Cons

  • Has no airlock hole,
  • Has poor seated gaskets

2. Liberty Pumps LE51A LE50-Series Submersible Automatic Sewage Pump

Liberty Pumps LE51A LE50-Series Submersible Automatic Sewage Pump
Specs
Price: 💲💲💲💲 (fewer 💲 = cheaper)
Weight: 42 pounds (19.05 kg)
Size: 16 x 11.5 x 9 inches (40.6 x 29.2 x 22.9 cm)
Flow Rate: 160 gallons per minute
Power Source: corded electric
Horsepower: 0.5 HP
Main Material: stainless steel
Voltage: 115
Wattage: 230

With proper installation, the liberty pump LE51A will last for several years. The pump is easy to install, and you can do it yourself if you don’t mind the mess. Liberty pumps are high-speed and rarely make noise.

Built-in a way that they can be operated manually when the switch fails. The pump design lets you quickly replace the power cord without breaking motor seals.

Its efficiency allows it to pump 160 gallons of water per minute. The liberty LE51A is mainly recommended for residential use only. The float for the pump is very adjustable, and you can set it at a depth of water you want.

Pros

  • It lasts for several years,
  • Clear instructions on how to install it, Pumps very fast,
  • It can be operated manually or automatically

Cons

  • Not recommended for commercial applications, Some parts may be having sealing problems

3. Hallmark Industries MA0387X-6 Sewage Pump

Hallmark Industries MA0387X-6 Sewage Pump
Specs
Price: 💲 (fewer 💲 = cheaper)
Weight: 26 pounds (11.79 kg)
Size: 8 x 6 x 16 inches (20.3 x 15.2 x 40.6 cm)
Flow Rate: 3200 gallons per minute
Power Source: battery powered
Horsepower: 0.5 HP
Main Material: stainless steel
Voltage: 115
Wattage: 560

The hallmark MA0387X-6 pump is made from heavy-duty stainless steel, making it very durable. It has thermal protection to prevent it from overheating. The pump comes with extra accessories like a float switch, an electric plug, a hose adapter, and a 20-inch power cable.

The hallmark MA0387X-6 pump is equipped with a tether switch for automatic operations and whose cable length you can adjust easily.

You may eventually appreciate its ability to pump 3200 gallons per minute. The pump has a motor that is high quality and very efficient. It can lift water 26 ft off the ground.

Pros

  • It has thermal protection to prevent overheating, Packed with some extra accessories,
  • Adjustable cable for tether switch,
  • Capable of crushing very hard solids

Cons

  • Float switch needs to be shaken before starting,
  • It can crack when dropped

4. RainBro 3/4 HP Cast iron submersible sewage pump with 10 ft. piggy back tether float switch

RainBro 3/4 HP Cast iron submersible sewage pump with 10 ft. piggy back tether float switch
Specs
Price: 💲💲💲 (fewer 💲 = cheaper)
Weight: 34.7 pounds (15.74 kg)
Size: 9.8 x 6.7 x 15.9 inches (25 x 17.1 x 40.5 cm)
Flow Rate: 106.6 gallons per minute
Power Source: Ac
Horsepower: 0.75 HP
Main Material: Cast iron
Voltage: 115
Wattage: 562

The RainBro 3/4 HP pump is relatively easy to install and can work well under harsh conditions. Something to note is that the pump may disconnect when the water level is below 11 inches. Only when the water rises to 21 inches will the pump work again. It has a piggyback float switch with a straightforward plugin. The float switch enables you to operate the pump automatically or manually.

When in operation, it will be hushed. Can easily handle 2-inch solids from septic tanks. The impeller is made from plastic hence can break easily. The RainBro 3/4 HP pump is best suited for sewage pits or septic tanks.

Pros

  • Pumps 29 feet high,
  • works well even under harsh conditions, It’s possible to readjust the operating point of the pump,
  • Easy to install

Cons

  • It has a plastic impeller which is not durable,
  • May experience frequent lock-ups

5. ECO-FLO Products RSE50W Cast Iron Sewage Pump with Wide Angle Switch

ECO-FLO Products RSE50W Cast Iron Sewage Pump with Wide Angle Switch
Specs
Price: 💲💲💲 (fewer 💲 = cheaper)
Weight: 0.16 pounds (0.07 kg)
Size: 110.3 x 9.8 x 19.7 inches (280.2 x 25 x 50 cm)
Flow Rate: 95 gallons per minute
Power Source: Ac
Horsepower: 0.5 HP
Main Material: Cast iron
Voltage: 115
Wattage: 360

The ECO-FLO RSE50W sewage pump should be fully immersed in the slurry. It can only handle 2-inch solids, and anything harder than that, you may have to install a grinder sewage pump. The pump is suitable for residential applications. It works very well and is quite efficient.

Due to the pump’s inability to handle very solid waste, it is recommended not to let it rest at the bottom of your septic. The bottom of your septic is where thick slurry settles and can easily break your ECO-FLO sewage pump.

The ECO-FLO RSE50W pump is powerful, pumps fast, and can constantly run for four hours straight.

The manufacturer indicates that you should receive a 20 inches cord, but the actual cord is 10 inches.

Pros

  • The Pump is fully submersible,
  • Instant kick up,
  • It can handle solids of up to 2 inches,
  • Very powerful

Cons

  • You get a 10-inch cord instead of the advertised 20 inches,
  • The seals tend to leak

6. Wayne RPP50 Cast Iron Sewage Pump with Piggy Back Tether Float Switch

Wayne RPP50 Cast Iron Sewage Pump with Piggy Back Tether Float Switch
Specs
Price: 💲 (fewer 💲 = cheaper)
Weight: 21 pounds (9.53 kg)
Size: 9.5 x 6 x 14 inches (24.1 x 15.2 x 35.6 cm)
Flow Rate: 103.3 gallons per minute
Power Source: Corded electric
Horsepower: 0.5 HP
Main Material: Cast iron
Voltage: 100
Wattage: 902

Wayne RPP50 cast iron sewage pump is durable and may last a minimum of fives years. It is highly efficient, and you can install it easily. You can also use it to pump large bodies of water, but it won’t work well with heavy sludge. Though it has a hard plastic impeller, it can perform the required work. The Wayne RPP50 pump is submersible and can handle 2-inch solid waste efficiently. It comes with an eight power cord.

It has two cords, one for the float switch and the motor pump. You can remove the one for the float if you want the pump to run continuously.

It has a weak tether back switch which breaks easily and may require frequent replacement.

Pros

  • Replaceable tether back switch, Durable cast iron motor,
  • The whole pump lasts longer,
  • Hard to hear it operating

Cons

  • Tether back switch breaks easily,
  • Moves only five feet of sewage

7. RainBro 1/2 HP Cast iron submersible sewage pump with 10 ft. piggy back tether float switch

RainBro 1/2 HP Cast iron submersible sewage pump with 10 ft. piggy back tether float switch
Specs
Price: 💲💲 (fewer 💲 = cheaper)
Weight: 34.2 pounds (15.51 kg)
Size: 9.8 x 6.7 x 15.9 inches (25 x 17.1 x 40.5 cm)
Flow Rate: 100 gallons per minute
Power Source: Ac
Horsepower: 0.5 HP
Main Material: Cast iron
Voltage: 115
Wattage: 562

The RainBro 1/2 HP sewage pump assures you good performance, with 100 gallons per minute flow rate. It pumps water to a height of 27 ft. Made with cast iron; it ensures durability while giving you value for your money. It manages to handle 2 inches of solid. Apart from the ten-foot power cord, you get an adjustable float switch to help with automatic operation. This RainBro 1/2 HP submersible sewage pump lasts for a long time. Operates quietly due to the high-quality float switches you can use to put the pump on or switch it off.

Pros

  • Installing is easy,
  • It has a reasonable flow rate of 100 gallons per minute,
  • You get a 10-inch power cord,
  • Durable

Cons

  • The switch for ON/OFF is hard to use,
  • Has a plastic impeller which may break easily

8. Zoeller M264 Waste-Mate Sewage Pump

Zoeller M264 Waste-Mate Sewage Pump
Specs
Price: 💲💲💲💲 (fewer 💲 = cheaper)
Weight: 35.5 pounds (16.1 kg)
Size: 22 x 36 x 22 inches (55.9 x 91.4 x 55.9 cm)
Flow Rate: 90 gallons per minute
Power Source: Ac/Dc
Horsepower: 0.4 HP
Main Material: Cast iron
Voltage: 115
Wattage: 1128

The Zoeller M264 waste mate sewage pump is exceptionally quiet when in operation. You won’t believe how fast you can install it even if you are not handy. It’s powerful and empties water very fast.

The pump can pump water as high as 12 ft. You get a replacement switch if the original one doesn’t work. There is no need to use any oil as the pump is hermetically sealed and has enough lubrication to last long.

The impeller has a non-clogging design made from engineered plastic. Cast iron is used to make the motor, pump housing, and switch cap durable.

Pros

  • Non-clogging impeller design,
  • The pump has enough lubrication,
  • Made from a solid and durable material,
  • It has a pump mounting stand

Cons

  • Sensitive to water level,
  • The top part tends to turn yellowish after some time

Verdict

Based on all of our experience with ejector pumps for sewage, we found that Superior Pump 93501 1/2-Horsepower Cast Iron Sewage Pump with Tethered Float Switch is the best sewage ejector pump available today.

Our Premium Option is Liberty Pumps LE51A LE50-Series Submersible Automatic Sewage Pump with all the best features and high-quality materials, but that’s only if you have more money to spend.

However, if you are on a slightly tighter budget, you can also consider the Hallmark Industries MA0387X-6 Sewage Pump as an affordable alternative.

Our other reviews you may find useful in your research:

What You Should Know Before Buying sewage ejector pumps

Sewage pump applications

A sewage pump is used to transfer sewage materials from one place to another. These devices are designed to regulate the sewage system of residential spaces and ensure that there is no waste or residual build-up in the low spots of a house. Sewage pumps are multi-purpose tools and can therefore be used for a variety of different reasons. However, the most common application of these pumps takes place in basements, bathrooms, crawlspaces, or other similar areas where the waste matter needs to be lifted up in order to connect it with the main sewer system or a septic tank. These pumps are also used in RVs to transfer sludge from the RV to a portable sewage tank.

Sewage pump vs sump pump

Sewage pumps and sump pumps are not the same. They look similar and share some features, but have different purposes. Sewage pumps are meant to force waste materials out of basements, crawlspaces, and RV bathrooms, and into the main sewage line or a septic tank. On the other hand, sump pumps are used to get rid of excess water caused by rain or flooding in basements. The main difference between the two is that sewage pumps deal with sewage, whereas sump pumps simply deal with excess water.

Material and Durability

The material of sewage pumps varies from brand to brand. The best possible material for a sewage pump is high-alloy white cast iron. This is because it extends the service life of the pumps: it provides optimal resistance, protects the pump from corrosion, and makes it suitable for all sorts of sewage materials including abrasive wastewater containing sand. Pumps made of white cast iron are considerably more durable and will help you in the longer run. They might be a slightly heavier investment, but are considered to be a better solution.

Pump accessories

To ensure that your sewage pump works in the best possible way, you should pair it with some high-quality accessories. These include alarms, basins, check valves, switches, hose bands, suction delivery hoses, discharge bends, and many more little tools that can aid you in maximizing the potential of your sewage pump. The price for each of these accessories varies in accordance with the brand you opt for and from where you source these tools, but when used correctly, all of them can contribute towards putting your sewage pump in working order and regulating the sewage system of your house.

Questions and Answers About sewage ejector pumps

How long do RV sewage pumps last?

Macerator pumps, which grind waste, last up to 10 years. However, this is contingent on how it is used and maintained. The more frequently the macerator is used, the less effective it will be at its job. In addition, if you clean your macerator regularly, the machine’s life span extends.

How do you know if your ejector pump is broken?

There are several signs which indicate that your ejector pump is broken. If the machine runs but is not ejecting a significant fluid volume, it may malfunction. Similarly, the pump has failed if it stops working before emptying the pit or continues to run even when the cavity empties out. Loud noises coming from the machine, such as whirring and grinding, are also a sign of trouble. Other indications include dirty water running through the system, a sewage odor, and difficulty starting the pump. These early warning signs apply to both ejector pumps in homes and RVs.

What happens if ejector pump fails?

If your ejector pump fails, the flushed sewage and solid waste can accumulate in the pipes. Built-up waste creates pressure and causes the pipes to burst. The bursting happens at the lowest point, like the basement in homes and the base level of the RV. You are likely to have a sewage leaking event which is the first and often only indicator of ejector pump failure.

Why does my sewage pump smell?

Sewage pumps can smell bad because of a clog or a waste backup in the tanks. You can smell waste if the valves have been left open and the waste has dried up in the black water tanks on the sides or the bottom. On the other hand, the sewage pump can smell bad in some homes because of stagnant water in the basin or a sewage infiltration beneath the foundation because of a broken sewer line.

You Might Also Like

No Comments

    Leave a Reply

    As an Amazon Associate, I earn a small commission from a link you click on the site that lead to a qualifying purchase. It will not cost you anything additional, but it does help us in supporting this site to keep creating great content for you. All our recommendations and reviews included in the site are purely unbiased.